Lightweight and waterproof, hooded, off-road adventure jacket

The evolution of a DIRT Series modern classic, the Component 2 H2O builds upon this pinnacle adventure jacket’s well-received, feature-driven design approach by making the stand-out details even better and adding another few for good measure.

Form and function in fashionable harmony
Inspired by designs used throughout the outdoor segment, it’s very much form and function in fashionable harmony. Not to say it’s a compromise – more the exact opposite. Its strategically matched, abrasion resistant Cordura ripstop and PWR|Shell stretch ripstop materials give a hard-wearing, durable look to the Component 2 H2O’s actual tactical and lightweight characteristics. With 100% wind and waterproof, laminated hydratex, CE-level 1 SEESMART armour, and an added pouch to upgrade things with a CE-level 2 SEESOFT back protector, the Component 2 H2O pulls out all the stops.

Get your adventure on
With its removable hood, comfort-boosting neoprene collar, and ample ventilation, the Component 2 H2O is very much ready to hit the road. There’s still everything you need to take to the roads less travelled – or just leave the road altogether. Its active fit adds a casual, outdoor lifestyle feel, while the comfortably sizing has been primarily designed to slip over our Proteus protector jacket for when you’re really looking to get your adventure on.

Fit

Active fit
The Active fit is designed to provide full freedom of movement while minimizing any excess material that could limit mobility. It is strategically cut and tailored to fit the body where necessary, while allowing unrestricted movement during activity-focused movement.

Adjustability

Adjustment drawcord at hem
Adjustment tab at cuffs

Pockets

Slit pocket at back
The sleeve features a small pocket to hold a card or paper. The pocket is easy accessible.

Two inner pockets
Waterproof slit pocket at waist

Features

Adjustment drawcord at hood

Comfort collar
The comfort collar is added to products to offer more comfort in crucial places.

An extra soft fabric is used for a cosy finish.

Detachable hood
The zip-on hood can be easily removed from the jacket.

Waterproofing

hydratex|3L
A 3-layer construction; the hydratex|3L membrane has a layer of protective tricot laminated on each side of the membrane. This results in a waterproof and breathable membrane that is also very durable.

Ventilation

Zippers on lower arms
Zippers on upper arms
Zipper at upper back

Protection

Ready for Avertum Tech-Air airbag system - ONE SIZE UP
Under this garment you can wear our REV'IT! Avertum Tech-Air Airbag - or a Tech5 airbag - if you purchase the garment one size bigger than your usual size. If you wish to wear a garment that is marked as ''Ready for Avertum Tech-Air airbag system'', you must be sure that the garment can accommodate the expansion of the airbag and therefore we recommend following below fit equation: 1. Measure chest circumference and divide the measurement by two; 2. Measure garment flat on chest line; 3. If the difference between point 1 and point 2 is 12 centimeters or bigger the garment is suitable to wear on top of the airbag. Note: Please keep in mind that the garment should be purchased in the correct size in order for the shoulder and elbow protection to fit properly and best protect you in case of a crash. In order to create space for the expansion of the airbag, you can remove all separate layers (thermal liners, water proof liners) that can restrict the expansion of the airbag in the event of a crash. Remove the separate back protector in your garment, if any, when wearing the airbag (a back protector is included in the airbag) and adjust all adjustment straps on body to the widest position.

Prepared for SEESOFT CE-level 2 Insert Back Protector
The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.

SEESMART CE-level 1 Elbow Protectors
SEESMART CE-level 1 Shoulder Protectors

Outer shell material

3L CORDURA 750D ripstop
A three-layer CORDURA with ripstop properties.

Neoprene
Neoprene is a synthetic rubber useful for protective gear. It is abrasion-resistant, chemical-resistant, waterproof, somewhat stretchable, and buoyant.


PWR|Shell ripstop stretch
Durability and great abrasion resistance are the defining characteristics of PWR|Shell, thanks to its special ripstop weaving. Thick reinforcement threads are interwoven at regular intervals into the fabric in a crosshatch pattern known as ripstop.

Visibility

Laminated reflection on back
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric.

Laminated reflection at collar
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Laminated reflection on hood
Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

Laminated reflective logo on back
This product has a reflective logo at the back of the garment to help riders who are on the road be seen in low light, inclement weather, and at night.

WASH & CARE